How To Make The Lychee Juice At Home?

What is the methods and steps of homemade lychee juice?

1. Select some lychees to spare, and then put them together in the container. The amount of quantity depends on the individual situation.
2. Peel the selected lychees, then rinse them and put them into the container.
3. After peeling and rinsing, you can cut the pulp with a knife. Of course, the core is not edible. Be careful not to cut it up.
4. Litchi that cuts the flesh can be wasted a little, and the pulp close to the core can be thrown away. If you can't bear to throw it away, clean it out and pick it up one by one.
5. Pour the cut litchi into the juicy cup. We must pay attention to the fact that litchi is cut into small pieces, not too big!
6. Add proper amount of cold water to the juicer and cover it well.
7. Cover the lid and stir in the juicer.
8. Twist the juice cup, and then it starts to buzz, and of course, the fruit juice is shaped.
9. If it feels bad, you can continue to grind again.
10. You can pour the lychee juice out and drink it.

Problems and solutions of decreasing of the flour mill equipment

How to clean up the complete set of equipment for wheat milling process? Many flour business owner that use the flour mill equipment of our company or other companies are not properly.There are many factors that may cause breakdown or low effect of the flour mill equipment.

Factors that may cause problem

• They do not clean and maintain the machine, resulting in failure and efficiency. The flour business runner always do not think about themselves but always blame the quality of the flour mill equipment. In fact , the truth is that you should often check the condition and clean them if needed. Here are some following guidance for you.
• Any machine will wear out and reduce its lifespan after a long period of operation. At this time, we can reduce the influence bring buy over operation of the equipment through regular lubrication, replacement of worn parts, and cleaning of material remaining in the gaps inside the machine. The impact of the medium, thus ensuring the production efficiency and the quality of the finished product powder, is followed by the operation of instructions to guide the formal operation. Improper operation will not only damage the flour mill equipment but also cause more serious accidents, resulting in production suspension.

Therefore, as the person in charge of the flour production plant, we must pay attention to the above-mentioned contents. This is why our company will provide debugging and guidance training to every user, whether it is installing a stand-alone machine or a complete set of wheat processing equipment. The purpose is to enable flour processing equipment to perform better in the future, prolong the service life of the equipment and increase its processing capacity.

How can the flour mill equipment be properly maintained and fixed?

Generally, the flour mill equipment is used in a condition where dust flow around, with time goes by, more and more left on the flour mill equipment, it will leads to the cause of serious damage. It will not only makes the flour mill equipment worn out badly but also influence the quality of the flour powder. So the flour mill equipment must be regularly repaired and maintained.
What problems should we pay attention to when using and maintaining flour mill equipment on a daily basis?

• First, the flour mill equipment should be placed in a place where the environment is suitable, the ground is flatness and should keep the condition cool and dry. Before using the flour mill machine, check the material store chamber to see if there is any impurity. Before the material is crushed, it must be inspected. Any impurities in the material must not be mixed to avoid damage to the wheat flour machine.

• During the use of the wheat flour machine, it is necessary to periodically check whether the fixing nut of the movable tooth plate is loosen or all the fastening parts are loosen or not. In particular, check the screws in the fixed sprocket. Before starting the machine, inject proper amount of lubricants. Increase the number of refuelings for continuous operation. When the actual work time is 300 hours, the spindle bearing must be serviced and replaced with new lubricant. When changing the wearing parts, the repairman should be familiar with the operation of the wheat flour machine, if there is a major damage to contact the manufacturer for repair the machine.

It is an necessary part of maintaining and fixing the flour mill equipment. Proper maintain will prolong the service life of the machine and brings more benefits, as a flour mill machine manufacture, we suggest you to check your machine time by time to make sure they can work well.

Fruit Juice Processing Line Introduction

Fruit Juice Processing Equipment Introduction

(Fruit Washing Machine—Fruit Sorter—preheating machine—Pulping Machine—Belt Filter Press— Disc Centrifuge—Ultrafiltration—Mixing Tank—High Pressure Homogenizer—Vacuum Degasser—Vacuum Evaporation Machine—UHT Sterilizer—Hot Filling Machine—Continuous Spraying Sterilizer—Shrink—Plastic Casing Labe Machine—Wrap Around Case Packer)

Function of some equipment

Preheating machine: For juices it is essential that the original content of pectin shall be retained throughout the production. In this case, fruit enzymes must be inactivated during processing as soon as possible by a preheating process.
Clarify(Enzymatic Hydrolysis Tank) : For clear, filtered juices a breakdown of pectin is needed to enable a good yield and high degree of juice concentration, and this is done by adding specific pectolytic enzymes which hydrolise the pectin substances
Ultrafiltration system: To obtain clear juices, the enzymation is not the only steps required, but after that other phases such us sedimentation with fining agents, and ultrafiltration system are required.
Vacuum degasser: The contact with the air can be dangerous for fruits sensitive to oxidation, so, in some cases, it could be necessary to provide degasser system before the product packaging.

Compelte Project of Charcoal/Biomass Briquette

With consumption on mineral resources mounting up, more people start to get interested in biomass resourses which is known as renewable energy. At present, there is several kinds of renewable energy technologies for utilizing agricultural residues or wood waste by converting them into biofuel.

Biomass Briquette Plant is to make biomass raw material into club-shaped briquette such as ricehusk bars, sawdust bars or charcoal bars. This is the simplest way to use renewable energy by burning as biofuel.

Establishing a biomass briquetting system is not a big invest for personal use. A small set of biomass briquette plant need a crusher, a dryer and a set of biomass briquette press.

For market sales, biomass briquette is also a good product for home used stove, barbecue resturant and boiler in factory. Barbecue briquette need high quality material which have no much smoke and poisonous emissions. For boiler in factory, almost all kinds of biomass material can be used.

Utilization of agricultural residues or wood wastes is often difficult due to their uneven and troublesome characteristics. The process of compaction of residues into biomass briquette which have higher density than the original raw material is known as densification or biomass briquetting.