2018年12月7日星期五

How does the discharging rate influence the dischaing rate of steel silo?

Flyer is a steel silo manufacturer and supplier in China for over 20 years, hence we can provide our customers who want customsize silos or alrerady have different types of silos.
grain discharging

Why the discharing rate important to steel silo?

The steel silo discharging rate refers to the percentage of material discharged from the steel silo as a percentage of the total material, also known as the emptying rate. The emptying rate directly reflects the advantages and disadvantages of the practical performance of the steel silo, and is the main performance index of the steel silo. When the discharge condition of the steel silo deteriorates, the storage material of the storage accumulates more and more, and the increase of the accumulated material and the slowing of the discharge cause the effective fluidization volume of the steel silo to decrease, resulting in a low discharging rate. The low discharging rate not only makes the steel silo not play a good discharging effect, but also reduces the economic benefits of the steel silo utilization.
The large-scale steel silo discharge adopts pneumatic conveying mode, and the fluidity of the material is the key to whether the steel silo can be discharged normally. Material flow is subject to a variety of effects. The accumulation of materials for a long time, the humidity of the material is large, the outside air moisture enters the warehouse, the bottom of the reservoir is wet, and some improper operations are the reasons for the deterioration of material flowability.
silo loading system

What will influence the dischaing rate of steel silo?

  • The tonnage of the material is too large, the material level is too high, the material density is increased, the bottom of the reservoir is increased by the pressure of the storage material, the material is pressed against the bottom of the reservoir, and the fluidization performance is lowered. If the storage of the material is not carried out for a long time, the material in the warehouse is crushed to death, and the material is difficult to be given. This phenomenon generally occurs when the material is sold in the off-season, when the stock is much larger than the sales. In order to avoid compaction of materials for long-term storage, the steel warehouse should regularly use the external circulation pneumatic system to loosen the bottom material.
  • The water content of the powdered material itself is too high, resulting in a decrease or failure of fluidization properties during discharge. In this regard, the user should strictly control the moisture content before the material is put into storage, and reduce the moisture content of the material to a minimum. The more dry the material, the better its fluidization activity and the more difficult it is to compact.
  • The base layer of the bottom of the cement was not completely air-dried, and no effective moisture-proof measures were taken. The moisture at the bottom of the reservoir caused the humidity of the bottom material to be increased and bonded into blocks, which caused difficulties in the materials. In addition, some Party A's use of the unit is not uniform, the cone is naturally air-dried and requires early feeding, so the implementation of the moisture-proof measures at the bottom of the reservoir is particularly critical. Our company has decided to apply moisture-proof and waterproof materials on the surface of the guide cone to improve the dryness of the bottom of the reservoir. At the same time, the smooth and clean moisture-proof adhesive layer surface is more conducive to the material circulation.
We can deign silos for varity usage, our silo cost is not much and our silo quality is relaible, you can get more information by the silo project we built at home and aboard.

2018年12月2日星期日

Quality assurance of beverage machinery

As a dependent special machinery for beverage production, it should have a high scientific and technological content. Beverage machinery should not only ensure a better quality and good usability foundation, but also achieve the basic goal of scientific and rational application in the actual production practice. In particular, beverage machinery products with strong specificity have obvious specificity characteristics in actual production practice. Its comprehensive and practical quality has also reached a high level. But there is also an indispensable requirement of safety in production practice.

2018年11月25日星期日

Processing Technology Of Fruit Juice Machinery

Design determines process, process may decide design. Components with the same function can be designed with different structures, some of which are easy to process and ensure machining accuracy, but some structures are difficult to process, or even unable to process, so designers must understand the process. For the designed mechanical products, the technological process that each part should choose, the dimension, tolerance, roughness and technical conditions marked by each part drawing have a direct impact on the quality of the technological process and the length of the production cycle. According to the characteristics of part drawing and parts material, one or more of the following processes can be selected, such as cutting, casting, forging, sheet metal, stamping, extrusion, etc. Each of these processes has its most reasonable economic accuracy. So after the determination of part drawings and materials, to a certain extent, the process is determined.
When the shape of the part is more complex and the size is larger, it is difficult to forge. If the casting performance or welding performance is adopted, the structure should also meet the requirements of casting or welding. Casting or welding? Die forging or free forging? If the parts are produced in small batches and the cost of wooden dies and moulds exceeds the cost savings of machining, it is better to use welded parts or free forgings. If the production volume is large, casting or die forgings are more favorable.
If the other properties of the parts are satisfied, but the welding performance of the materials is not good, and there is no suitable materials with good welding performance, you can change the mode of connection. For example, welding should be threaded connection or other connection.
Sometimes, the delivery date of the product also affects the choice of manufacturing process. If the delivery date is urgent, welded parts are often used instead of castings.
When parts are manufactured by cold drawing process, the elongation of materials should be considered, and the effect of cold working hardening on the mechanical properties of materials should be considered. The hardness, yield limit and strength limit of steel and some non-ferrous metals have been greatly improved after cold work hardening, and the degree of improvement is related to the section shrinkage rate during processing. The larger the section shrinkage rate, the greater the degree of improvement.
The same structural material, if advanced and reasonable heat treatment process is adopted, the strength performance can be doubled. The specific conditions must be taken into consideration when adopting the heat treatment process.
For cutting parts, according to the geometry of the parts, the type of machining surface and the machining position, one or more cutting processes should be determined  such as turning, milling, drilling, boring and grinding. The same hole, turning, boring or grinding as the final process, depends on the machining accuracy and surface roughness.
In order to reduce tool wear and improve productivity and machining accuracy, the cutting performance of materials should be considered in mass production on automatic machine tools.
Another important aspect of the process is assembly, which is to assemble all parts into a whole. According to the structural characteristics of the product, assembly should choose suitable connection mode. Bolts, keys and pins can be easily disconnected. Rivet connection, removable but inconvenient. Welding, forming permanent connection, not removable.
Whether the surface is painted, polished, electroplated or coated with plastic depends on the appearance and corrosion resistance requirements.

2018年11月18日星期日

Material selection principle of juice processing machine parts

In the process of designing and manufacturing juice processing machine parts, it is very important to select and use metal materials reasonably. It is necessary to consider whether the properties of materials can adapt to the working conditions of parts and make parts durable. The material is required to have better processing performance and economy, so as to improve the productivity of parts, reduce costs, reduce consumption and so on. Material selection should pay attention to the chemical and physical properties, mechanical properties and technological properties, such as density, modulus of elasticity, strength, toughness, corrosion resistance, wear resistance, high and low temperature strength, welding performance, hardenability, heat treatment deformation, malleability, cutting performance, economy and so on. Material selection should be based on the product batch.

2018年11月16日星期五

Hardox400 wear resistant steel plate

HARDOX 400 is a wear-resistant steel plate with a Brinell hardness of 400HBW. It has good cold bending properties and is mainly used in anti-wear conditions. The HARDOX 400 has very good solderability. The hardox 400 are mainly used in making crushers, sieve plates, feeders, feed funnels, hoists, blades, conveyors, buckets, blades, gears, dump trucks, scrapers, industrial trucks, railways Trucks, bulldozers, excavators. Slurry pipes, screw conveyors, presses, etc. HARDOX400 wear-resistant steel is "fine grained steel." The HARDOX400 wear steel hardness is about 370-430HBW.
HARDOX400 wear-resistant steel mechanical properties: yield strength Re = 1000MPa. Tensile strength Rm = 1250 MPa. Elongation A5 = 10% (typical value of 20 mm thick steel plate).
HARDOX400  wear steel impact toughness: test temperature: -40 (-40F) °C. Impact energy Charpy-V longitudinal = 45J (20 mm thick steel plate typical value).
HARDOX400 wear-resistant steel delivery status: quenching.
HARDOX400 wear-resistant steel implementation standards: EN 10 204 - 3.1.

hardox 400

Applications:

Due to its high hardness, high strength and high toughness, HARDOX wear-resistant plates are ideal for applications where wear is severe. The high wear resistance of the steel plate extends the service life of the dump truck body, the bucket of the excavator, the crusher and the like.
The hardness of the steel plate is obtained by an effective quenching process on our water quenching line. This method achieves both higher hardness and lower alloy composition in the steel. The resulting wear plates are easy to machine, bend and weld.
Chmecal Composition of Hardox 400
Grade C max Mn max P max S max Si max Cr max Ni max Mo max B max V Other Element
Hardox 400 0.20 1.60 0.025 - 0.70 0.80 1.00 0.80 0.005 -  

Mechanical Properties of Hardox 400
  Tensile Strength Yield Strength  
Grade Origin Mpa Mpa Elongation in 2 inches (min.)% Brinell Hardness
Hardox 400 Sweden 1250 1000 10 360-440
 

Application areas:

1. Construction machinery and equipment: loader bulldozer excavator bucket board, side blade board, bucket bottom board, blade, jaw board;
2. Handling machinery and equipment: unloading mill chain plate, hopper liner, grab blade, medium-sized automatic dump truck tipping board;
3. Construction machinery and equipment: cement pusher gear plate, concrete mixer liner, mixing floor liner, dust collector liner;
4. Metallurgical machinery and equipment: iron ore sintering conveying elbow, iron ore sintering machine lining, scraper lining;
5. Mining machinery and equipment: mineral materials, stone crusher liners, blades;
6. Other mechanical equipment: sanding machine cylinder, blade, various port machinery wear parts;
7. Thermal power machinery equipment: coal mill liner, coal bucket, coal sub-transport, coal sub-distributor grid, coal unloading equipment liner;
8. Shot blasting machinery: shot blasting machine lining.

ANSON Steel is one exporter of HARDOX 400 steel plate. The HARDOX steel plate is a solidfied steel, especially suitable for long haul use.

Selection method of supporting equipment for steel silo

The selection of supporting equipment for steel silo is very important. For example, horizontal transportation can use buried scraper conveyor or belt conveyor. Which equipment is better, futher analysis and comparison are needed.
The advantage of the buried scraper conveyor is that it can be discharged at multiple points, the sealing performance is good which effect that the belt conveyor can not be reached, so it is more suitable to select the buried scraper conveyor on the top of the steel silo. In addition, the belt conveyor has the advantages of reducing material breakage, allowing long-distance transportation and power consumption. Therefore, in industries with high material crushing requirements, such as the wet-processed starch industry, only belt conveyors can be provided, and buried scraper conveyors cannot be used.
belt conveyor
Therefore, the selection of steel silo equipment is very critical in the process of silo design. Choosing unsuitable equipment can not only meet the requirements of the process, but also cause irreparable damage.

How to choose silo supporting equipment?

  • The output of the equipment is matched with the function: the large amount of transportation depends on the capacity of the steel silo and the ability to enter and exit the grain. The storage capacity is matched with the subsequent main workshop. Choosing too large equipment will not only cause equipment investment waste, but also the operating cost. But devices that are too small will often have traffic jams. In the current port bulk grain steel silo, the general type of ship is between 5,000 tons and 6,000 tons, usually involving 1000t / h of production capacity to meet the capacity of loading and unloading ships, otherwise there will be port detention. In grain and oil processing plants, it depends on the ability of the car to unload grain. Generally, the efficiency of bagged grain unloading grain is low, and the efficiency of bulk grain unloading grain is high.
  • Consider sufficient steel silo equipment maintenance space: The steel silo equipment maintenance space is a very important consideration in the process of silo design. Because the steel silo equipment needs normal maintenance, it requires sufficient space for the operator. Such as the replacement of bearings, the replacement of cleaning sieves, and the maintenance of motor idlers.
  • Electric control room position: It is better to set up a separate room in the electric control room. It can also be set in the working tower or under the steel silo, but it must be in a closed environment, no dust can enter, otherwise it will affect The life of electrical components and serious safety accidents.
silo control room

How to increase the service life of grain steel silo supporting equipment?

This is a question that all customers will think of, let me tell you today. All customers want to buy a set of worry-free equipment, because such equipment has low failure rate, low maintenance rate, can save maintenance costs and increase the service life.
      Steel silos and vertical silos generally have supporting equipment, hoists, scrapers, belt conveyors, etc. These are the most basic configurations. Customers with high storage requirements will also have cleaning equipment such as drum screens and vibrating screens. color sorting machines, dust removal equipment, pulse dust removal, suction separators, etc., then what do we need to pay attention to when choosing steel silo supporting equipment?
  • First: look at the thickness of the board, look at the material of the silo supporting equipment. Whether it is conveying equipment, or cleaning equipment, they alll use steel board. The main difference of high quality supporting equipment and low quality silo supporting equipment comes from the procurement links and the choice of raw materials, many In order to save costs and expand the price advantage, manufacturers often lower the standard in material selection. The products with low prices appearing on the market are some non-standard products. The steel plates used are non-standard steel plates, and the accessories used are non-standard accessories. Without the raw materials provided by regular manufacturers, the service life and use effect of the equipment will definitely be greatly affected.
  • Second: look at the accessories, look at the manufacturers, now in this era of globalization, all manufacturers in order to improve production efficiency, will longitudinally purchase the necessary equipment for production equipment, such as sprocket and bucket used in scraper and conveyor , scraper, and motor to transmit power, reducer, electronic control equipment, etc. These accessories are invisible in the inside of the equipment, but directly affect the use effect and service life of the product, and the output is up to standard. The key point is that when you buy, you can see weather the manufacturers of these accessories is a better supplier in China, so you can judge the quality of the equipment manufacturers, and reduce the failure rate in the future use. It is more worry-free, it also reduces the cost of maintenance and improves the efficiency of use.
  • Third: look at the combination of product compatibility, good products and equipment in the process of installation and assembly, must have a good degree of fit, if the matching equipment does not match the size of the installation process, it will not have a good use effection.

2018年10月26日星期五

What problems do you need to know about flour mill equipment?

Abnormal condition happens in flour milling machinery and flour mill equipment are inevitable, so as in any machinery. However, if you understand the working principle of flour making machine, you can effectively improve the work efficiency and reduce bad influence on flour making machine.

What problems do you need to know about flour mill equipment?

  • The failure of spiral stirrer. This may caused by excessive feeding, incorrect motor rotating, blocked discharge ports, broken blades of the stirrer, etc. Related technicians need to check carefully to find out the reasons and then solve them.
  • The failure of air lock. Due to poor ventilation, the bag may be sucked up. Common causes include leakage at the joint, wear of the impeller, etc. In the latter case, a rubber plate can be installed on the outer edge to improve the condition.
Airlcok in flour milling plant
  • The failure of motor. Under normal circumstances, flour mill equipment need to use more than 10 different sizes of motors. Therefore, if something goes wrong, it must be checked in time to avoid potential safety hazards. The cause may be bearing oil shortage, damage or overload of motor.
  • The freshly processed flour is wet. Some people may mistakenly think that there is a mechanical problem. But it is not. As I told you that in the flour processing process, cleaning is an essential process, which is mainly used to remove impurities and facilitate wheat peeling. So it's normal to have some moisture. If you want it to be drier, we has have direr to make it dry.

Maintenance of flour milling machinery

The maintenance of the flour mill equipment will greatly help the service life of the flour milling plant and single flour making machine. Therefore, in the daily processing and production, we must regularly maintain the flour mill equipment. Let's take a look at how to do the maintenance of the flour mill equipment!
  • In order to avoid some erroneous operations of personnel, resulting in equipment failure, affecting efficiency and shortening the service life, as a regular manufacturer, it is required to ensure its flour mill equipment operators to be proficient in corresponding laws, regulations and management systems, and obtain professional qualification certificates or certificates. Qualified for training to operate, this can greatly reduce the failure rate.
  • For routine maintenance, personnel should pay attention to the fact that some special parts of flour mill equipment. Such as glass instruments should be kept clean and dry and classified and stored. At the same time, direct heating of glass instruments should be avoided, and the correct practice is to use asbestos webs to heat slowly and uniformly.
Check-the-flour-mill-machinery

In short, there are many factors that can affect the equipment during use, such as dust, temperature, humidity, vibration, noise, corrosion, etc., personnel should pay attention to strict control to ensure that flour making machines work table is fixed and flat, and meet the requirements of use. After use of the flour milling machinery, clean up and restore in time. In addition, the power equipment should be installed with an independent power switch in accordance with the rated power, and have a good grounding wire and a regulated power supply.
Correct using and proper maintain are two main aspect that influence the service life of flour mill equipment, also the best way to reduce the cost of fixing or replace a new flour mill machinery. To lowest the cost and get the biggest profit, as a flour plant owner, the above two aspects are basic knowledge for you.
As for these who are planning to start a flour bossiness, it is a good choice for you to visit our website to get some necessary information you need. If you have any question, please do not hesitate to contact us.   F