2018年11月16日星期五

Hardox400 wear resistant steel plate

HARDOX 400 is a wear-resistant steel plate with a Brinell hardness of 400HBW. It has good cold bending properties and is mainly used in anti-wear conditions. The HARDOX 400 has very good solderability. The hardox 400 are mainly used in making crushers, sieve plates, feeders, feed funnels, hoists, blades, conveyors, buckets, blades, gears, dump trucks, scrapers, industrial trucks, railways Trucks, bulldozers, excavators. Slurry pipes, screw conveyors, presses, etc. HARDOX400 wear-resistant steel is "fine grained steel." The HARDOX400 wear steel hardness is about 370-430HBW.
HARDOX400 wear-resistant steel mechanical properties: yield strength Re = 1000MPa. Tensile strength Rm = 1250 MPa. Elongation A5 = 10% (typical value of 20 mm thick steel plate).
HARDOX400  wear steel impact toughness: test temperature: -40 (-40F) °C. Impact energy Charpy-V longitudinal = 45J (20 mm thick steel plate typical value).
HARDOX400 wear-resistant steel delivery status: quenching.
HARDOX400 wear-resistant steel implementation standards: EN 10 204 - 3.1.

hardox 400

Applications:

Due to its high hardness, high strength and high toughness, HARDOX wear-resistant plates are ideal for applications where wear is severe. The high wear resistance of the steel plate extends the service life of the dump truck body, the bucket of the excavator, the crusher and the like.
The hardness of the steel plate is obtained by an effective quenching process on our water quenching line. This method achieves both higher hardness and lower alloy composition in the steel. The resulting wear plates are easy to machine, bend and weld.
Chmecal Composition of Hardox 400
Grade C max Mn max P max S max Si max Cr max Ni max Mo max B max V Other Element
Hardox 400 0.20 1.60 0.025 - 0.70 0.80 1.00 0.80 0.005 -  

Mechanical Properties of Hardox 400
  Tensile Strength Yield Strength  
Grade Origin Mpa Mpa Elongation in 2 inches (min.)% Brinell Hardness
Hardox 400 Sweden 1250 1000 10 360-440
 

Application areas:

1. Construction machinery and equipment: loader bulldozer excavator bucket board, side blade board, bucket bottom board, blade, jaw board;
2. Handling machinery and equipment: unloading mill chain plate, hopper liner, grab blade, medium-sized automatic dump truck tipping board;
3. Construction machinery and equipment: cement pusher gear plate, concrete mixer liner, mixing floor liner, dust collector liner;
4. Metallurgical machinery and equipment: iron ore sintering conveying elbow, iron ore sintering machine lining, scraper lining;
5. Mining machinery and equipment: mineral materials, stone crusher liners, blades;
6. Other mechanical equipment: sanding machine cylinder, blade, various port machinery wear parts;
7. Thermal power machinery equipment: coal mill liner, coal bucket, coal sub-transport, coal sub-distributor grid, coal unloading equipment liner;
8. Shot blasting machinery: shot blasting machine lining.

ANSON Steel is one exporter of HARDOX 400 steel plate. The HARDOX steel plate is a solidfied steel, especially suitable for long haul use.

没有评论:

发表评论