2018年11月16日星期五

Hardox400 wear resistant steel plate

HARDOX 400 is a wear-resistant steel plate with a Brinell hardness of 400HBW. It has good cold bending properties and is mainly used in anti-wear conditions. The HARDOX 400 has very good solderability. The hardox 400 are mainly used in making crushers, sieve plates, feeders, feed funnels, hoists, blades, conveyors, buckets, blades, gears, dump trucks, scrapers, industrial trucks, railways Trucks, bulldozers, excavators. Slurry pipes, screw conveyors, presses, etc. HARDOX400 wear-resistant steel is "fine grained steel." The HARDOX400 wear steel hardness is about 370-430HBW.
HARDOX400 wear-resistant steel mechanical properties: yield strength Re = 1000MPa. Tensile strength Rm = 1250 MPa. Elongation A5 = 10% (typical value of 20 mm thick steel plate).
HARDOX400  wear steel impact toughness: test temperature: -40 (-40F) °C. Impact energy Charpy-V longitudinal = 45J (20 mm thick steel plate typical value).
HARDOX400 wear-resistant steel delivery status: quenching.
HARDOX400 wear-resistant steel implementation standards: EN 10 204 - 3.1.

hardox 400

Applications:

Due to its high hardness, high strength and high toughness, HARDOX wear-resistant plates are ideal for applications where wear is severe. The high wear resistance of the steel plate extends the service life of the dump truck body, the bucket of the excavator, the crusher and the like.
The hardness of the steel plate is obtained by an effective quenching process on our water quenching line. This method achieves both higher hardness and lower alloy composition in the steel. The resulting wear plates are easy to machine, bend and weld.
Chmecal Composition of Hardox 400
Grade C max Mn max P max S max Si max Cr max Ni max Mo max B max V Other Element
Hardox 400 0.20 1.60 0.025 - 0.70 0.80 1.00 0.80 0.005 -  

Mechanical Properties of Hardox 400
  Tensile Strength Yield Strength  
Grade Origin Mpa Mpa Elongation in 2 inches (min.)% Brinell Hardness
Hardox 400 Sweden 1250 1000 10 360-440
 

Application areas:

1. Construction machinery and equipment: loader bulldozer excavator bucket board, side blade board, bucket bottom board, blade, jaw board;
2. Handling machinery and equipment: unloading mill chain plate, hopper liner, grab blade, medium-sized automatic dump truck tipping board;
3. Construction machinery and equipment: cement pusher gear plate, concrete mixer liner, mixing floor liner, dust collector liner;
4. Metallurgical machinery and equipment: iron ore sintering conveying elbow, iron ore sintering machine lining, scraper lining;
5. Mining machinery and equipment: mineral materials, stone crusher liners, blades;
6. Other mechanical equipment: sanding machine cylinder, blade, various port machinery wear parts;
7. Thermal power machinery equipment: coal mill liner, coal bucket, coal sub-transport, coal sub-distributor grid, coal unloading equipment liner;
8. Shot blasting machinery: shot blasting machine lining.

ANSON Steel is one exporter of HARDOX 400 steel plate. The HARDOX steel plate is a solidfied steel, especially suitable for long haul use.

Selection method of supporting equipment for steel silo

The selection of supporting equipment for steel silo is very important. For example, horizontal transportation can use buried scraper conveyor or belt conveyor. Which equipment is better, futher analysis and comparison are needed.
The advantage of the buried scraper conveyor is that it can be discharged at multiple points, the sealing performance is good which effect that the belt conveyor can not be reached, so it is more suitable to select the buried scraper conveyor on the top of the steel silo. In addition, the belt conveyor has the advantages of reducing material breakage, allowing long-distance transportation and power consumption. Therefore, in industries with high material crushing requirements, such as the wet-processed starch industry, only belt conveyors can be provided, and buried scraper conveyors cannot be used.
belt conveyor
Therefore, the selection of steel silo equipment is very critical in the process of silo design. Choosing unsuitable equipment can not only meet the requirements of the process, but also cause irreparable damage.

How to choose silo supporting equipment?

  • The output of the equipment is matched with the function: the large amount of transportation depends on the capacity of the steel silo and the ability to enter and exit the grain. The storage capacity is matched with the subsequent main workshop. Choosing too large equipment will not only cause equipment investment waste, but also the operating cost. But devices that are too small will often have traffic jams. In the current port bulk grain steel silo, the general type of ship is between 5,000 tons and 6,000 tons, usually involving 1000t / h of production capacity to meet the capacity of loading and unloading ships, otherwise there will be port detention. In grain and oil processing plants, it depends on the ability of the car to unload grain. Generally, the efficiency of bagged grain unloading grain is low, and the efficiency of bulk grain unloading grain is high.
  • Consider sufficient steel silo equipment maintenance space: The steel silo equipment maintenance space is a very important consideration in the process of silo design. Because the steel silo equipment needs normal maintenance, it requires sufficient space for the operator. Such as the replacement of bearings, the replacement of cleaning sieves, and the maintenance of motor idlers.
  • Electric control room position: It is better to set up a separate room in the electric control room. It can also be set in the working tower or under the steel silo, but it must be in a closed environment, no dust can enter, otherwise it will affect The life of electrical components and serious safety accidents.
silo control room

How to increase the service life of grain steel silo supporting equipment?

This is a question that all customers will think of, let me tell you today. All customers want to buy a set of worry-free equipment, because such equipment has low failure rate, low maintenance rate, can save maintenance costs and increase the service life.
      Steel silos and vertical silos generally have supporting equipment, hoists, scrapers, belt conveyors, etc. These are the most basic configurations. Customers with high storage requirements will also have cleaning equipment such as drum screens and vibrating screens. color sorting machines, dust removal equipment, pulse dust removal, suction separators, etc., then what do we need to pay attention to when choosing steel silo supporting equipment?
  • First: look at the thickness of the board, look at the material of the silo supporting equipment. Whether it is conveying equipment, or cleaning equipment, they alll use steel board. The main difference of high quality supporting equipment and low quality silo supporting equipment comes from the procurement links and the choice of raw materials, many In order to save costs and expand the price advantage, manufacturers often lower the standard in material selection. The products with low prices appearing on the market are some non-standard products. The steel plates used are non-standard steel plates, and the accessories used are non-standard accessories. Without the raw materials provided by regular manufacturers, the service life and use effect of the equipment will definitely be greatly affected.
  • Second: look at the accessories, look at the manufacturers, now in this era of globalization, all manufacturers in order to improve production efficiency, will longitudinally purchase the necessary equipment for production equipment, such as sprocket and bucket used in scraper and conveyor , scraper, and motor to transmit power, reducer, electronic control equipment, etc. These accessories are invisible in the inside of the equipment, but directly affect the use effect and service life of the product, and the output is up to standard. The key point is that when you buy, you can see weather the manufacturers of these accessories is a better supplier in China, so you can judge the quality of the equipment manufacturers, and reduce the failure rate in the future use. It is more worry-free, it also reduces the cost of maintenance and improves the efficiency of use.
  • Third: look at the combination of product compatibility, good products and equipment in the process of installation and assembly, must have a good degree of fit, if the matching equipment does not match the size of the installation process, it will not have a good use effection.

2018年10月26日星期五

What problems do you need to know about flour mill equipment?

Abnormal condition happens in flour milling machinery and flour mill equipment are inevitable, so as in any machinery. However, if you understand the working principle of flour making machine, you can effectively improve the work efficiency and reduce bad influence on flour making machine.

What problems do you need to know about flour mill equipment?

  • The failure of spiral stirrer. This may caused by excessive feeding, incorrect motor rotating, blocked discharge ports, broken blades of the stirrer, etc. Related technicians need to check carefully to find out the reasons and then solve them.
  • The failure of air lock. Due to poor ventilation, the bag may be sucked up. Common causes include leakage at the joint, wear of the impeller, etc. In the latter case, a rubber plate can be installed on the outer edge to improve the condition.
Airlcok in flour milling plant
  • The failure of motor. Under normal circumstances, flour mill equipment need to use more than 10 different sizes of motors. Therefore, if something goes wrong, it must be checked in time to avoid potential safety hazards. The cause may be bearing oil shortage, damage or overload of motor.
  • The freshly processed flour is wet. Some people may mistakenly think that there is a mechanical problem. But it is not. As I told you that in the flour processing process, cleaning is an essential process, which is mainly used to remove impurities and facilitate wheat peeling. So it's normal to have some moisture. If you want it to be drier, we has have direr to make it dry.

Maintenance of flour milling machinery

The maintenance of the flour mill equipment will greatly help the service life of the flour milling plant and single flour making machine. Therefore, in the daily processing and production, we must regularly maintain the flour mill equipment. Let's take a look at how to do the maintenance of the flour mill equipment!
  • In order to avoid some erroneous operations of personnel, resulting in equipment failure, affecting efficiency and shortening the service life, as a regular manufacturer, it is required to ensure its flour mill equipment operators to be proficient in corresponding laws, regulations and management systems, and obtain professional qualification certificates or certificates. Qualified for training to operate, this can greatly reduce the failure rate.
  • For routine maintenance, personnel should pay attention to the fact that some special parts of flour mill equipment. Such as glass instruments should be kept clean and dry and classified and stored. At the same time, direct heating of glass instruments should be avoided, and the correct practice is to use asbestos webs to heat slowly and uniformly.
Check-the-flour-mill-machinery

In short, there are many factors that can affect the equipment during use, such as dust, temperature, humidity, vibration, noise, corrosion, etc., personnel should pay attention to strict control to ensure that flour making machines work table is fixed and flat, and meet the requirements of use. After use of the flour milling machinery, clean up and restore in time. In addition, the power equipment should be installed with an independent power switch in accordance with the rated power, and have a good grounding wire and a regulated power supply.
Correct using and proper maintain are two main aspect that influence the service life of flour mill equipment, also the best way to reduce the cost of fixing or replace a new flour mill machinery. To lowest the cost and get the biggest profit, as a flour plant owner, the above two aspects are basic knowledge for you.
As for these who are planning to start a flour bossiness, it is a good choice for you to visit our website to get some necessary information you need. If you have any question, please do not hesitate to contact us.   F

2018年9月30日星期日

Silos for grain storage

Where do we need grain silo?
Grain silos are wildly used in large farm, flour mill or other food processing factories. grain silos can store all kinds of material, such as common seen wheat, corn, soybean, peanut,  sorghum, or other material.
grain silos are commonly are very helpful in large farms, every year after harvest, farmers can keep their new harvest grain in silos in case of moisture or bugs and rain. using a grain silo can store for longer time and keep the grain fresh and clean, with the harm of outside world.
For food processing factories, silos for grain storage can help them keep their row material, if the raw material goes bad, it will cause damage to food and icrease the cost of the factory.
Choosing a proper grain silo is an important way of building your business, you can visit www.silobuilder.com to get more information.
all kinds of grain

2018年9月24日星期一

Fruit Juice Powder Production Process

Applications of fruit juice powder

  • Used as raw materials for making fruit juice and wine.
  • Serve as food additives. It can not only improve the color, flavor and taste of food, but increase the nutritive value.
  • Further process. Fruit peel, core, shell powders contain pectin and other substances, which can serve as raw materials for some food and medicines.
Fruit juice powder can be used to make instant powder mix, fruit cake, milk powder, sandwich biscuit, dietary supplements, infant food, puffed food, spices, pastries, cold snacks, and instant food. They can increase the added value of food.

Advantages of fruit powders

  • With all water content removed, fruit juice powder has long shelf life.
  • Low weight and volume can reduce cost for storage and transportation.
  • Wide applications. Fruit juice powder can be used as a flavoring agent in cooking and various food.

2018年9月16日星期日

API Spec 5L Steel Plate

API Spec 5L

pipeline steel plate
MORE DETAILS OF API 5L PIPELINE STEEL PLATE
  GB/T 9711 and ISO 3183 uses same pipeline steel plate grades with API Spec 5L oil and gas pipeline steel plate,just put the x to l,the yield strength into the international system of units,expressed in MPa and to rounded to the number at the end of 0 and 5. This can also be as raw materials of pellet machines. 
 Manufacture of petroleum oil and gas pipeline steel plate, natural gas gathering , transmission pipeline and coal, building material slurry pipeline in the plate and strip referred to as steel plates.
In the pipeline, in addition to the requirements has a high compressive strength, but also requires a high and low temperature toughness and excellent welding performance.Oil and gas transmission pipeline steel plate API Spec 5L :(X42 L290NB, X46 , X52 L360NB, X56 , X60 L415NB, X65 L450MB , X70 L485MB, X80 L556MB). X70 used for West-East gas pipeline project pipeline API Spec 5L steel compared to the yield strength of the steel X80 which corresponds to, but the tensile strength than steel X70.

2018年9月9日星期日

What kind of flour mill machine is suitable for you?

There are all kinds of flour mill machinery in the market for you to choose, some of our customer may ask what kind of flour mill machinery should I choose?
Here is an answer: It is depends on your needs and capacity.
The following are our flour mill machines.
Single flour mill for small business or home use.
M6FX series flouring milling machine
M6FC series small flour mill machinery 
M6FY series flouring machine  

Next time, we will introduce you some of our large flour mill plant.