Why do you build your own mango juice plant?

As the manufacturing technology progresses and demands for mango juice increase, the processing of mango juice has become a market heat. A mango juice production line includes the following steps: washing, sorting, peeling, destoning, pulping, filtration, degassing, homogenization, concentration, sterilization and packaging. Different mango processing machineries are required in each step.

Why grain silos need ventilation and fumigation?

The purpose of ventilation and fumigation of grain silo

The purpose of ventilation and fumigation is to prevent the stored grains away from the damage of pests, rats or birds. Because they may bring mildew which may case imbalance inside the grain silo. Therefore, to ensure the safety of the grain and achieve better pest killing effect and higher benefits. A good design can guarantee the safety management of grain storage.
It is the most basic condition and important means to ensure the safety of grain are through ventilation and fumigation. Because the steel silo has the characteristic of well sealed, the water content in and temperature inside the grain steel silo has a certain effect on the grain storage.
It is also not easy to dissipate heat and humidity, with big resistance of ventilation airflow, etc. At the same time, because large storage capacity and great input & output conveying capacity of the silo, it may cause dust explosion easily.

Ventilation can be divided into two modes: natural ventilation and mechanical ventilation.

Ventilation system is a necessary supporting equipment in each grain steel silo, the function of ventilation system is to exchange the air inside and outside the silo, to keep the balance of temperature and moisture content of grains and ensure the stability environment inside the grain silo to prevent mildew. The purpose of ventilation system is to create a low temperature of the grain storage environment, improve the grain storage ability, to prevent the transfer of cool and moisture content, expel bad smell from grain and disperse the air after fumigation. This can prevent pest occurrence and spread, also take precautions against dust and explosion.
There is an axial-flow fan on the top of the silo to expel hot and humid air. This can not only not only speeds up directional flow of air in silo, but also prevents condensation phenomenon aroused by temperature difference between inside and outside of the silo.
The axial-flow fan can also adjust the top space temperature and dissipate hot and humid in the upper space and the surface of the silo to prevent grain on the upper layer and the surface from affection by high temperature at the same time.
Normally, the ventilation system is composed with three parts: air blower, air channel and galvanized air deflector. The soft ripe is used to connect air blower and air channel to reduce noise. There are also two kinds of deflector: earth cage style and tablet embedded style. The air channel can be installed both outside and inside.

Fumigation type of Grain Steel Silo

The circulation fumigation system can strictly meet the requirement of China GB/T17913-1999 standard, and can reach the ideal effect of pest killing, grain fumigating and so on. The whole system is designed based on the theory of grain storage, the theory of aerodynamic circulation and the theory of chemical control and the application of micro computer control technology. 

The development of grain steel silo in China.

Grain steel silo has experienced four stages in China after it is being applied in China.

The trail period of steel silo application start from 1979 and end at 1981. At that time, small steel silos are mainly used as temporary storage silo and transit silo.

The second period is the period of applied technology(1982-1984), the new technology of fabricated steel silo was introduced from the United State, which are mainly used as as raw material processing silo and transit silo in port.
Upgrade period (1983-early 1990s), during this time, a variety of steel silo were introduced to China, on the basis of other silo construction technology, we absorb their advantages and developed our unique technology. steel silo has gotten significant innovation and development.
Development period (1995- ): During this period, construction and application of steel silo has made great development in China, mass production and installation of steel silo have been in full swing, the strength, safety and performance of steel silo have greatly improved，so a large number of silo products have exported abroad, reflecting international level in construction technology of steel silo currently. In China, after only 20 years of practice, grain steel silo is now widely used in each link of storage and transportation.

What are the functions and uses of L-leucine (CAS 61-90-5)?

L- leucine can promote insulin secretion and reduce blood sugar. Promoting sleep, reducing sensitivity to pain, alleviating migraine, alleviating anxiety and tension, alleviating the symptoms of chemical reactions in the body caused by alcohol and helping to control alcoholism. It can help treat dizziness and promote healing of skin wounds and bones. Therefore, doctors usually advise patients to take leucine supplements after surgery. L-leucine is often used to prepare amino acid infusion and comprehensive amino acid preparation for treatment or health care. It can also be used as an additive in food, cosmetics and feed. Used for plant growth accelerators.

Why grain silos need ventilation and fumigation?

The purpose of ventilation and fumigation of grain silo

The purpose of ventilation and fumigation is to prevent the stored grains away from the damage of pests, rats or birds. Because they may bring mildew which may case imbalance inside the grain silo. Therefore, to ensure the safety of the grain and achieve better pest killing effect and higher benefits. A good design can guarantee the safety management of grain storage.
It is the most basic condition and important means to ensure the safety of grain are through ventilation and fumigation. Because the steel silo has the characteristic of well sealed, the water content in and temperature inside the grain steel silo has a certain effect on the grain storage.
It is also not easy to dissipate heat and humidity, with big resistance of ventilation airflow, etc. At the same time, because large storage capacity and great input & output conveying capacity of the silo, it may cause dust explosion easily.

Ventilation can be divided into two modes: natural ventilation and mechanical ventilation.

Ventilation system is a necessary supporting equipment in each grain steel silo, the function of ventilation system is to exchange the air inside and outside the silo, to keep the balance of temperature and moisture content of grains and ensure the stability environment inside the grain silo to prevent mildew. The purpose of ventilation system is to create a low temperature of the grain storage environment, improve the grain storage ability, to prevent the transfer of cool and moisture content, expel bad smell from grain and disperse the air after fumigation. This can prevent pest occurrence and spread, also take precautions against dust and explosion.
There is an axial-flow fan on the top of the silo to expel hot and humid air. This can not only not only speeds up directional flow of air in silo, but also prevents condensation phenomenon aroused by temperature difference between inside and outside of the silo.
The axial-flow fan can also adjust the top space temperature and dissipate hot and humid in the upper space and the surface of the silo to prevent grain on the upper layer and the surface from affection by high temperature at the same time.
Normally, the ventilation system is composed with three parts: air blower, air channel and galvanized air deflector. The soft ripe is used to connect air blower and air channel to reduce noise. There are also two kinds of deflector: earth cage style and tablet embedded style. The air channel can be installed both outside and inside.

Fumigation type of Grain Steel Silo

The circulation fumigation system can strictly meet the requirement of China GB/T17913-1999 standard, and can reach the ideal effect of pest killing, grain fumigating and so on. The whole system is designed based on the theory of grain storage, the theory of aerodynamic circulation and the theory of chemical control and the application of micro computer control technology. 

The development of grain steel silo in China.

Grain steel silo has experienced four stages in China after it is being applied in China.

The trail period of steel silo application start from 1979 and end at 1981. At that time, small steel silos are mainly used as temporary storage silo and transit silo.

The second period is the period of applied technology(1982-1984), the new technology of fabricated steel silo was introduced from the United State, which are mainly used as as raw material processing silo and transit silo in port.
Upgrade period (1983-early 1990s), during this time, a variety of steel silo were introduced to China, on the basis of other silo construction technology, we absorb their advantages and developed our unique technology. steel silo has gotten significant innovation and development.
Development period (1995- ): During this period, construction and application of steel silo has made great development in China, mass production and installation of steel silo have been in full swing, the strength, safety and performance of steel silo have greatly improved，so a large number of silo products have exported abroad, reflecting international level in construction technology of steel silo currently. In China, after only 20 years of practice, grain steel silo is now widely used in each link of storage and transportation.

How to use a fruit juice beverage equipment?

The usage time of fruit juice beverage equipment depends entirely on the time of use and after use. Some of the packages that are easily damaged require that beverage packaging machines package products in an absolutely vacuumed environment, otherwise the damage to the products is immeasurable.

In the process of production, the most commonly used equipment for producing beverage is packaging machinery, and the price is high. If the failures often happen, they will cause loss to the production enterprise. So, it is very important that the daily maintenance of the fruit juice beverage machine and equipment.

For more information, please contact us. We will serve you wholeheartedly.

http://www.ticomachine.com

Comparsion between concrete storage silo and lipp steel silo

Comparsion between steel silo and concrete silo

A lot of customers always have trouble in make a decison between conceret silo and steel silo. Today, we are going to make a comparsion between conceret silo and steel silo to provide you a better understanding.

Technical performance comparison between Lipp Silo and Concrete Silo are shown in the table below.

No.	Item	Lipp Silo	Concrete Silo
1	Air Tightness	Good air tightness, can store liquid	Good air tightness
2	Service Life	More than 20Years	More than 50 Years
3	Construction Method	Imported equipment, mechanical operation	Sliding mode construction
4	Maintenance Work	Regular maintenance, small amount of maintenance	No need to maintain
5	Appearance	Aesthetic	Commonly
6	Meteorological requirement	Construction is not affected by the weather	Construction affected by the weather
7	Environmental requirements for construction	Less	More

Advantages of Flyer steel silo

• First, good overall performance and long service life. In the process of construction, the steel silo is completely constructed by special and advanced equipment. During the rolling process, the outer wall of the silo is bitten into a spiral rib that is 5 times the thickness of the material and 30 mm to 40 mm in width, which greatly enhances the load on the silo body. The ability to make the steel silo's overall strength, stability, and shock resistance better than other silos. In addition, according to the requirement of anti-corrosion and grinding strength of storage materials, the steel silo body material department selects the excellent plate ratio so that its normal service life can reach 30-40 years. Far more than the life of other silos.
• Second, good air tightness and wild application. Since the steel silo adopts special equipment for bending and construction, it can ensure the quality of any part of the silo body in the process, so its sealing is particularly good, and it can store cement, fly ash, slag ultrafine powder and other powders. Steel storage silos are widely used in the building materials industry. Such as cement plants, power plants, grinding stations.
• Third, short construction period and low cost. Spiral folded steel silo is on site construction. The construction and bending line speeds of Lipp construction equipment can reach 5m/min. Scaffolding and other auxiliary facilities are not required, so the construction period is extremely short. Spiral folded steel silos are made entirely of sheet steel and weigh only as much as the steel bars of the same capacity reinforced concrete silo, which greatly reduces the cost. In addition, because it can bend and shape the two different materials inside and outside the barrel by the double-layer bending method, the construction cost for storing corrosive materials in industries such as chemical and environmental protection can be greatly reduced.
• Fourth, small footprint and easy management. Unlike other steel silos, the spiral folded steel silo can be arbitrarily selected in a wide range of heights and diameters. The distance between the two silos is as small as 500 mm, making full use of space and reducing the floor space. The high degree of automation of the spiral steel silo is accompanied by equipment such as temperature measurement and material level, which is very convenient for users to manage.
• Fifth, high strength. The continuous spiral undercut of the steel silo is five times the thickness of the base metal, which greatly enhances the anti-loading capacity of the steel silo.